Pelfa Group-eps.jpg
Impianto completo 1.jpg
Suola Rotante_066 new.jpg
TANK CONCAST (25).jpg
P1030808.jpg
Pit Turbine_9_4.jpg
Spiral Case Palisse nuova4.jpg
MG_7300.jpg
MG_7267.JPG
TANK CONCAST (15).jpg
BIENVENU
Pelfa Group Srl
Pelfa Group, société présente sur le marché international depuis 40 ans, est spécialisée dans la production de matériels, machines, composants mécaniques et mécano soudés destinés à divers secteurs industriels. La Société maîtrise le processus complet de fabrication depuis l’obtention de la commande jusqu’au produit fini, incluant sa gestion complète : conception, achat de la matière première, opérations de débit, découpe, chanfreinage, pliage, roulage, assemblage, soudure, traitements thermiques, usinage, sablage, peinture, montage en atelier, essais, et installation sur site.
DÉCOUVREZ
NOUVELLES
USINAGE CIRCULAIRE DE TURBINES
Usinage de diamètres jusqu’à 4m sur machine 5 axes et jusqu’à 8 m sur tour vertical avec programmation CAD-CAM.
DÉCOUVREZ
WORK IN PROGRESS PER PAMA SPEEDRAM
Nouvelles productions réalisées par la machine aléseuse-fraiseuse Pama, en activité depuis 6 mois.
DÉCOUVREZ
AF30 ELECTRO-ABGASFILTER
Le groupe Pelfa a été mentionné dans l'article de Voestalpine concernant la fourniture du "AF30 Electro-Abgasfilter", présent sur le site de Linz (AT).
DÉCOUVREZ
EXPÉRIENCE DU TRAVAIL CHEZ PELFA
Pelfa Group a de nouveau ouvert les portes de l'entreprise à un groupe de 9 étudiants qui ont décidé de faire une expérience de travail.
DÉCOUVREZ
Inscrivez-vous à notre NEWSLETTER
Souscription
CONDITIONS GÉNÉRALES D’ACQUISITION ET/OU DE FOURNITURE
COOKIE POLICY
COSA SONO I COOKIE
I cookie sono file di testo che possono essere utilizzati dai siti web per rendere più efficiente l'esperienza per l'utente.
Essi contengono informazioni di base sulla navigazione in Internet e grazie al browser vengono riconosciuti ogni volta che l'utente visita il sito.

La legge afferma che possiamo memorizzare i cookie sul tuo dispositivo se sono strettamente necessari per il funzionamento di questo sito. Per tutti gli altri tipi di cookie ci serve il tuo permesso.

Il tuo consenso si applica a questo sito web. 

La presente cookie policy ha lo scopo specifico di illustrare i tipi, le modalità di utilizzo nonché di fornire indicazioni circa le azioni per rifiutare o eliminare i cookie presenti sul sito web, se lo si desidera. 

Per ulteriori informazioni sui titolari del trattamento dei tuoi dati personali, ti rimandiamo alla sezione Privacy Policy presente nel sito. 

In qualunque momento è possibile disabilitare i cookies presenti sul browser; ti ricordiamo che quest'opzione potrebbe limitare molte delle funzionalità di navigazione del sito. 

Pelfa Group Srl rispetta le disposizioni contenute nel Codice in materia di protezione dei dati personali, così come modificato dal Decreto legislativo 28 maggio 2012, n. 69, in recepimento della direttiva europea 2009/136/CE.
QUALI COOKIE USIAMO:
Cookies tecnici:

Sono i cookies che permettono all'utente di navigare nel nostro sito web e di utilizzare le diverse opzioni e servizi che offriamo, quali, ad esempio, l'identificazione della sessione di navigazione, l'accesso al proprio pannello utente per la gestione delle trattative e la gestione dei domini acquistati, l'utilizzo delle funzioni di sicurezza durante la navigazione e il pagamento. 

Cookie di profilazione di terza parte: 

Facciamo uso di svariati fornitori che possono a loro volta installare cookies per il corretto funzionamento dei servizi che stanno fornendo. Se desiderate avere informazioni relative a questi cookie di terza parte e su come disabilitarli vi preghiamo di accedere ai link delle tabelle qui di seguito. 

Inoltre accedendo alla pagina http://www.youronlinechoices.com/it/le-tue-scelte è possibile informarsi sulla pubblicità comportamentale oltre che disattivare o attivare le società elencate e che lavorano con i gestori dei siti web per raccogliere e utilizzare informazioni utili alla fruizione della pubblicità.

Cookies tecnici atti al corretto funzionamento di servizi terzi

Questi cookie ci permettono di monitorare le performance del sito. Qui di seguito l'elenco dei servizi utilizzati e i link alle rispettive pagine di privacy policy.

Cookies Statistici e di Misurazione dell'audience di terza parte:

Sono i cookies che ci permettono di monitorare ed analizzare il comportamento degli utenti del nostro sito web. Attraverso questi cookies siamo in grado di monitorare la navigazione dell'utente sul sito web per apportare miglioramenti basati sull'analisi dei dati. Questi cookies (servizi web di terza parte) forniscono informazioni anonime / aggregate sul modo in cui i visitatori navigano sul sito. 

Ad esempio quelli ottenuti con il servizio di Google Analytics, che fornisce gli strumenti per la misurazione dei profili della navigazione web. 

Google Analytics 

Sistema di statistiche – Cookies analytics 


Cookies di profilazione a fini pubblicitari e per il remarketing 

Questi cookie (servizi di advertising di terza parte) vengono utilizzati al fine di inviare pubblicità e contenuti personalizzati in base alla cronologia di navigazione sul sito stesso.

Google Adwords

Servizio di remarketing e conversione campagne - Cookies di remarketing e conversione



Cookies di social media

Questi cookies di terza parte vengono utilizzati per integrare alcune diffuse funzionalità dei principali social media e fornirle all'interno del sito. In particolare permettono la registrazione e l'autenticazione sul sito tramite facebook / google +.

Facebook 


Google+ 


Web beacons 

Pelfa Group Srl usa i Web beacons, questi elementi sono immagini che si trovano su una pagina web o in una email e servono a monitorare il comportamento online degli utenti che visitano il nostro sito web o che ricevono una delle nostre newsletter. 

Lo scopo di utilizzare questa tecnologia è quello di monitorare l'attività degli utenti, come l'area del sito visitata, e il tempo trascorso in navigazione.
ISTRUZIONI DISABILITAZIONE COOKIES DAI BROWSERS
Se si utilizza Internet Explorer

In Internet Explorer, fare clic su "Strumenti" poi "Opzioni Internet". Nella scheda Privacy, spostare il cursore verso l'alto per bloccare tutti i cookie o verso il basso per consentire a tutti i cookie, e quindi fare clic su OK. 

Se si utilizza il browser Firefox

Vai al menu "Strumenti" del browser e selezionare il menu "Opzioni" Fare clic sulla scheda "Privacy", deselezionare la casella "Accetta cookie" e fare clic su OK.

Se si utilizza il browser Safari

In Browser della votazione, selezionare il menu "Modifica" e selezionare "Preferences". Clicca su "Privacy". Posizionare l'impostazione "cookies Block" sempre "e fare clic su OK.

Se si utilizza il browser Google Chrome

Fai clic sul menu Chrome nella barra degli strumenti del browser. Selezionare "Impostazioni". Fare clic su "Mostra impostazioni avanzate". Nella sezione "Privacy", fai clic sul pulsante "Impostazioni contenuti". Nella sezione "Cookies", selezionare "Non consentire ai siti per memorizzare i dati" e di controllo "cookie di blocco e di terze parti i dati sito", e quindi fare clic su OK. 

Se usi un qualsiasi altro browser, cerca nelle Impostazioni del browser la modalità di gestione dei cookies.
INFORMATIVA PRIVACY
INFORMATIVA ai sensi dell'art. 13 del d.lgs 30 giugno 2003 n. 196 (“Codice”) e del Regolamento UE 679/2016 (“GDPR”). Nell'osservanza del Codice e del GDPR, Pelfa Group Srl, come meglio individuata in seguito, in qualità di "Titolare" del trattamento, Le fornisce alcune informazioni circa l'utilizzo degli eventuali dati personali conferiti dagli utenti che consultano e/o interagiscono con il sito. 
Finalità del trattamento dei dati
L'utente è libero di fornire i suoi dati personali per l'invio del proprio curriculum vitae, per sollecitare l'invio di materiale informativo o di altre comunicazioni. Il trattamento dei dati personali potrà essere effettuato unicamente per rispondere alle richieste pervenute, ai sensi dell’art. 6.1, lett. b) del GDPR. Il conferimento di tali dati è facoltativo, ma il mancato conferimento degli stessi può comportare l'impossibilità di ottenere quanto richiesto.
Modalità di trattamento dei dati
Il trattamento dei dati personali avviene mediante strumenti manuali, informatici e telematici e in modo da garantire la sicurezza e la riservatezza dei dati stessi. Vengono utilizzati sistemi di prevenzione e protezione, costantemente aggiornati e verificati in termini di affidabilità.
Categorie di soggetti ai quali i dati possono essere comunicati
Per il perseguimento delle finalità di cui sopra, Pelfa Group Srl necessita di comunicare i dati personali ai propri "incaricati" ed a soggetti esterni "responsabili". L’elenco completo dei Responsabili è disponibile presso la sede del Titolare.
Titolare del trattamento 
Titolare del trattamento è Pelfa Group Srl, con sede legale in 20122 MILANO (MI), Corso Italia, 45,  C.F. e P.I.V.A. 05547380963, email info@pelfa.it
Data Protection Officer (DPO)
Data Protection Officer (DPO) del Titolare, ai sensi dell’art. 37 del GDPR, è il sig. Redento Fabbro, contattabile al seguente indirizzo e-mail privacy@pelfa.it.
Diritti degli interessati
Ai sensi dell’art. 7 del Codice Privacy e degli artt. 15 e ss. del GDPR, Lei ha il diritto di ottenere:
  •  la conferma dell'esistenza o meno di dati personali che La riguardano, anche se non ancora registrati, e la loro comunicazione in forma intelligibile;
  • una copia dei Suoi dati personali
  • la cancellazione dei Suoi dati personali;
  • la limitazione del trattamento dei Suoi dati personali; 
  • in un formato strutturato, di uso comune e leggibile da dispositivo automatico i dati personali che Lei ci ha fornito o che Lei stesso ha creato – esclusi i giudizi creati dal Titolare e/o dagli incaricati ex art. 4 del Codice Privacy / dalle persone autorizzate a trattare i dati a nome e per conto del Titolare ex art. 4 del GDPR - e di trasmetterli, direttamente o per mezzo del Titolare, ad un altro titolare del trattamento;
  • l'indicazione:
  • dell'origine dei dati personali; 
  • delle categorie di dati personali trattati; 
  • delle finalità e modalità del trattamento;
  • della logica applicata in caso di trattamento effettuato con l'ausilio di strumenti elettronici; 
  • degli estremi identificativi del Titolare e degli eventuali responsabili;
  • del periodo di conservazione dei Suoi dati personali o dei criteri utili per la determinazione di tale periodo;
  • dei soggetti o delle categorie di soggetti ai quali i dati personali possono essere comunicati o che possono venirne a conoscenza in qualità di rappresentante designato nel territorio dello Stato, di responsabili o di incaricati ex art. 4 del Codice Privacy / persone autorizzate a trattare i dati a nome e per conto del Titolare ex art. 4 del GDPR; 
  • l'aggiornamento, la rettificazione ovvero, quando Vi ha interesse, l'integrazione dei dati; 
  • la trasformazione in forma anonima o il blocco dei dati trattati in violazione di legge, compresi quelli di cui non è necessaria la conservazione in relazione agli scopi per i quali i dati sono stati raccolti o successivamente trattati; 
  • l'attestazione che le operazioni di cui alle lettere a) e b) sono state portate a conoscenza, anche per quanto riguarda il loro contenuto, di coloro ai quali i dati sono stati comunicati o diffusi, eccettuato il caso in cui tale adempimento si rivela impossibile o comporta un impiego di mezzi manifestamente sproporzionato rispetto al diritto tutelato. 
  • Lei, inoltre, ha diritto di opporsi, in tutto o in parte: 
  • per motivi legittimi, al trattamento dei dati personali che La riguardano, ancorché pertinenti allo scopo della raccolta; 
  • al trattamento di dati personali che La riguardano a fini di invio di materiale pubblicitario o di vendita diretta o per il compimento di ricerche di mercato o di comunicazione commerciale.
Per esercitare i suddetti diritti, può inviare una comunicazione AL SEGUENTE INDIRIZZO:

Pelfa Group Srl - Via Corso Italia, 45 20122 Milano (MI)

indicando in oggetto "Privacy - esercizio dei diritti ex art. 7 del D.Lgs. 196/2003 ed ex artt. 15 e ss. del GDPR".

La informiamo, da ultimo, che qualora ritenga che i Suoi diritti siano stati violati dal Titolare e/o da un terzo, Lei ha il diritto di proporre reclamo al Garante per la Protezione dei Dati Personali e/o ad altra autorità di controllo competente in forza del GDPR.

G0013343.jpg
SOCIÉTÉ
Pelfa Group, société présente sur le marché international depuis 40 ans, est spécialisée dans la production de matériels, machines, composants mécaniques et mécano soudés destinés à divers secteurs industriels. La Société maîtrise le processus complet de fabrication depuis l’obtention de la commande jusqu’au produit fini, incluant sa gestion complète : conception, achat de la matière première, opérations de débit, découpe, chanfreinage, pliage, roulage, assemblage, soudure, traitements thermiques, usinage, sablage, peinture, montage en atelier, essais, et installation sur site.
Les multiples points forts de Pelfa Group sont le savoir-faire «know-how» et la qualité des produits, fruit de décennies d'études, de travail et d'expérience sur le marché, le personnel expert et hautement qualifié, la recherche et le développement, les investissements dans la formation continue, les machines modernes de dernière technologie. L'organisation générale très réactive et flexible permet de rationaliser la production du simple composant de petite dimension à la plus grande réalisation industrielle complexe.
HISTOIRE
Travail des métaux depuis 1359
Pelfa Group, travail des métaux depuis 1359: dans les archives historiques, la société remonte à 1359, on y retrouve même le nom du propriétaire Mr Fabbro Redento. La société était spécialisée dans le travail des métaux, tradition que nous avons gardée jusqu'à aujourd'hui.

En 1979, Mr Fabbro fonde "Pelfa s.n.c." spécialisée dans la manutention pour Ferriere Nord. Au fil du temps, la société s'est développée et depuis peu s'est déplacée dans de nouveaux locaux.
La dynamique de Pelfa Group provient de l'intuition aiguë de son fondateur : motiver concrètement ses meilleurs salariés en les nommant associés et collaborateurs, résumant ainsi avec orgueil «la croissance de Pelfa Group aujourd’hui est reconnue comme une des plus dynamiques réalités industrielles du secteur de la mécano-soudure, projet et construction des machines. Nous sommes arrivés par la qualité technique du travail et par les volumes à un niveau de production que nous ne pensions jamais pouvoir atteindre». «Aujourd’hui, à son côté, collaborent 4 associés (Forgiarini Andrea, Fabbro Daniele, Bertino Alessandro e Fabbro Indira) et 150 collaborateurs dans une structure organisée aux dimensions remarquables: 20.000 m2 couverts sur 7,5 hectares.
CERTIFICATION DUN et BRADSTREET
Au coeur de la philosophie progressiste de Pelfa Group srl la plus grande attention est portée à la production, l'amélioration continue de l'outil de travail, des systèmes et solutions pour arriver à une gestion organisationnelle, administrative et financière très efficace.

L’obtention du niveau 1 de CRIBIS attribue l’indice maximum de fiabilité, évalué à partir de l’analyse approfondie des données du bilan.

Pour Pelfa Group srl, le niveau 1 de CRIBIS confirme la solidité et le sérieux de la société pour honorer les engagements pris avec toute la filière productive.
CPC PELFA GROUP SRL EN.jpg
PROJET MANAGEMENT
Par l'engagement et la recherche de nos collaborateurs, nous avons consolidé les rapports professionnels avec les plus grands clients nationaux et internationaux du secteur sidérurgique et de l'industrie énergétique et avons instauré des relations fortes et constructives.

L'équipe de nos techniciens hautement spécialisés et expérimentés nous permet d'être à l'avant-garde dans un monde toujours plus compétitif pour satisfaire les exigences de nos clients. Nous opérons très rapidement avec le process le plus complet et technologiquement de pointe, autant du point de vue des équipements que de l’organisation et de la gestion.


PM steps:
• Basic and detailed Engineering
• Detailed PM
• Project Planning
• Quality Assurance
• Inspection and Testing
• Logistic

OXYCOUPAGE
SURFACE TOTALE 3.500m²

Notre stock matière est d'environ 1000 tonnes avec des tôles de différentes épaisseurs nous garantissant une disponibilité quasi immédiate. Notre système d'imbrication permet une traçabilité totale et nous assure le minimum de chutes.
Liste machines:

  • Messer plasma 400A-HDHypertherm banc 3.000x25.000 mm avec Skew Rotator, épaisseur maxi 50 mm;
  • Messer oxy banc 4.000x13.000 mm, épaisseur maxi 200 mm;
  • Messer oxy banc 4.000x13.000 mm, épaisseur maxi 400 mm;
Capacité mensuelle 700 tonnes.

Les facteurs clef de notre atelier de découpe:
Traçabilité totale;
Certificat matière 3.1 ou 3.2;
Fournisseurs Européens certifiés;
Approvisionnement direct en usine.

MECANO SOUDURE, TRAITEMENT THERMIQUE, GRENAILLAGE PEINTURE
SURFACE TOTALE 7.500m²

Dans la zone du mécano soudure il y a trois rouleuses: 80x3m, 40x3m et 8x2.5m, les deux presses-plieuses sont 12xsp.18 et 4xsp.5, dans la zone de soudage il y a 70 machines à souder parfaitement calibrées, 5 arcs immergés et un lisseur lourd (30 tonnes).

Le système qualité suit la norme EN 1090-2 (EXC4), l’UNI EN ISO 3834-2, l’EN 15085 CL.1
Le personnel, qualifié selon EN287-1, est très bien préparé et est capable de faire face à n'importe quel type de soudage.

Pour les contrôles destructifs, le personnel a obtenu les certifications suivantes.

Personnel qualifié
Niveau. 3 selon UNI EN ISO 9712
Niveau. 2 selon le SNTC
Qualifié selon CSWIP:
  • VT
  • LP
  • MT
  • UT
  • RX
EN473 - Niveau 2 et SNTC
VT - Niveau 2
LP - Niveau 2
MT - Niveau 2
UT - Niveau 2
RX - Niveau 2

Pic de productivité : 800 tonnes/mois.


FOUR DE TRAITEMENT THERMIQUE
La Société dispose d’un four de 9mx9mx6m d’une capacité de 100 tonnes. Température maxi 900°; capacité de montée en température 160°/heure et de refroidissement de 80°/heure toutes 2 programmables.

GRENAILLAGE PEINTURE
Les 2 sont dotés d’une implantation technologique moderne qui utilise divers produits selon le cahier des charges requis.
Le grenaillage est installé en cabine insonorisée, la peinture, avec aspiration utilise la pulvérisation ou le rouleau, pour les charpentes de grandes dimensions jusqu’à 60 tonnes.
Revêtement également par airless ou conventionnel.
USINAGE
SURFACE TOTALE 4.000m² 

L'atelier d'usinage est doté de machines modernes et équipées en levage jusqu'à 100 ton

Les machines sont régulièrement vérifiées et renouvelées, c’est ainsi que nous pouvons maintenir une très haute qualité pour toute la production.

Liste de nos principales machines:
  • Nouveauté: Aléseuse et Fraiseuse PAMA - SPEEDRAM 4000 MODEL - CNC HEIDENHAIN iTNC 530HSCI
  • Fraiseuse Zayer Thera a 5 axes: L12.000x4.000xh 2.500;
  • Tour vertical CNC "BERTHIEZ" Ø 8.200xh4.000 mm;
  • Fraiseuse à portique Zayer L14.000x4.500xh4.000 mm;
  • Aléseuse PAMA CNC 16.000x3.500x1.700 mm;
  • Aléseuse PAMA CNC 8.000x2.000x1.500 mm;
  • Aléseuse CME CNC 3.000x1.500x1.800;
  • Tour WMW CNC Ø 1.800xL12.000 mm;
  • Tour Vertical MORANDO CNC Ø 2.600xL1.600 mm;
  • Tour TACCHI Ø 600xL6.000 mm équipé d'une tête de fraisage;
  • Machine de mesure tridimentionnelle POLI 7.000x3.000x2.000 mm

MONTAGE, ESSAIS ET LOGISTIQUE
SURFACE TOTALE 5.000m² 

Pelfa group est capable de réaliser prémontage et montage de machines et de matériels même de grandes dimensions.
La hauteur maximum est de 10 m et la capacité de levage est de 100 tonnes.
Le professionalisme et le savoir-faire du personnel technique permettent l’assemblage de divers types de matériels: mécaniques, pneumatiques, tuyauteries, electriques, lubrification, hydrauliques et refroidissement.

En phase finale nous pouvons exécuter les essais machine avec tests de fonctionnalité (et selon la demande du client à froid ou à chaud).

Sur demande client Pelfa organise aussi le transport, l’emballage et les manutentions. Notre personnel technique est habitué à l’organisation des transports exceptionnels que nous faisons pratiquement chaque semaine.

Grace à sa grande expérience, Pelfa Group est capable de réaliser d’autres installations et divers travaux.

Née dans le secteur sidérurgique, Pelfa Group s’est spécialisé aussi dans d’autres secteurs et plus particulièrement le secteur hydroélectrique , éolien, huile et gaz nucléaire et secteur de déplacement et de levage de la terre.
ACIER
Pelfa Group a depuis toujours réalisé des ensembles de grand dimensions pour le secteur sidérurgique, des études à la fabrication de portions d’installations (mais également d’installations complètes poches de coulée, tourelles, retourneurs, oscillateurs, éléments de coulée continue, planeuses, échangeurs de refroidissement, machines d’enfournement, convoyeurs à rouleaux, cages de laminoirs, cisailles.
Fours et machines de coulée continue
ENERGIE
Ces dernières années la société s’est spécialisée également dabs le secteur énergétique, avec l’éolien, l’offshore, le gas, le nucléaire et aussi particulièrement dans l’énergie hydraulique, réalisations de composants de turbines complètes : Francis, Kaplan, Pelton et vis d’Archimède.
HYDRO
Water Turbines
WIND, OFFSHORE, OIL&GAS
RAIL
DIFFERENTS SECTEURS
L’expérience pluri décennale, le know how et l’innovation a permis à Pelfa Group d’acquérir des connaissances et des compétences dans d’autres secteurs : constructions privées, équipements industriels, manutention.
P

CONTACTS
Bureau enregistré
PELFA GROUP srl
Corso Italia, 45
20122 MILANO (MI)
Siège administratif, bureaux et établissements
PELFA GROUP srl
Via Europa, 12/b
33030 BUIA (UD)
Tel: +39 0432 899411
Fax: +39 0432 899480
Mail: info@pelfa.it
Sito: www.pelfa.it
Demander plus d'informations, remplissez le formulaire!
Soumettre
NOUVELLES
25.07.2018
WORK IN PROGRESS POUR PAMA SPEEDRAM 
Nouvelles productions réalisées par la machine aléseuse-fraiseuse Pama, en activité depuis 6 mois. 
Vous trouverez ci-après des images illustrant le traitement d'un châssis de générateur et d'un pièce du renforcement pour les fondations.
20.06.2018
AF30 ELECTRO-ABGASFILTER
Le groupe Pelfa a été mentionné dans l'article de Voestalpine concernant la fourniture du "AF30 Electro-Abgasfilter", présent sur le site de Linz (AT).
Notre société a fourni toutes les structures en acier pour le filtre électrostatique, un système de purification qui permet de séparer le flux de gaz entrant des particules polluantes. Pour cette offre du 350t. on étaient nécessaires 27 transports exceptionnels.
15.06.2018
EXPÉRIENCE DU TRAVAIL CHEZ PELFA
Pelfa Group a de nouveau ouvert les portes de l'entreprise à un groupe de 9 étudiants qui ont décidé de faire une expérience de travail. Pour la plupart sont des lycéens issus d'instituts techniques et professionnels de la région. Les étudiants ont été affectés à différents bureaux et installations de production, en fonction de leurs études. L'étudiant Giulia, dans l'entreprise avec le projet « alternance travail / école» nous a laissé son témoignage: «J'ai fini le quatrième année de l'Institut Technique Marchetti et afin de faire les examens finaux, il faut atteindre un certain nombre d'heures des stages dans les entreprises. Ceci est mon deuxième stage en Pelfa: cette année, je suis en mesure d'effectuer des tâches multiples pour les différents bureaux, comme l'enregistrement des factures et bons de livraison, l'envoi de confirmations de commandes, le contrôle de l'amortissement, etc. Je suis très heureuse de cette expérience qui a été positive, car je peux effectuer de nombreux emplois intéressants, élargir mes connaissances et apprendre beaucoup de choses ».
21.05.2018
NOUVELLE FRAISEUSE ALESEUSE PAMA SPEEDRAM MODELE 4000
Fraiseuse aléseuse course X 20 000 et 6500 en vertical.
Table tournante TH 100 de 4m x 4 m charge maxi 100 tonnes.
04.05.2018
USINAGE CIRCULAIRE DE TURBINES
Usinage de diamètres jusqu’à 4m sur machine 5 axes et jusqu’à 8 m sur tour vertical avec programmation CAD-CAM.
EQUIPEMENTS POUR CHARIOTS ELEVATEURS
Pelfa group étudie et réalise des solutions innovantes pour les chariots élévateurs. Ces équipements sont homologués Pelfa Group et certifiés CE; La fabrication de ces équipement est née de l’expérience plus que trentenaire dans le secteur sidérurgique, du know how, des études sur les produits et de la collaboration entre le bureau d’étude et les ateliers. Pelfa Group a répondu aux diverse exigences des clients en rendant possible la réduction des temps et des couts de manutention des marchandises.
BANDO POR FESR 2014 2020
Industrialisation d’un équipement hydroélectrique à vis sans fin 176.800,00€

GENERAL CONDITIONS OF PURCHASE AND/OR SUPPLY
1) ORDER:
1.a) The order is considered as definitively executed with the return of the model countersigned by the Supplier, constituting declaration of knowledge and acceptance of both the same order and of the present general conditions.
The order must be returned in copy with double subscription: respectively for acceptance of the order and the general conditions and for adherence to the clauses specifically indicated therein. If said copy is not received within 48 hours after sending the order, PELFA GROUP S.R.L. will have the right to consider the order fully accepted or confirmed or may withdraw it unilaterally. In any case, the relationship will be governed by these general conditions.
1.b) With the acceptance of the order the Supplier declares to know and accept these general conditions of purchase/supply that will be the only ones governing the relationship between the parties, excluding any other rules, without prejudice to the obligations deriving from current regulatory instruments and to different and express provision made in writing between PELFA GROUP S.R.L. and the Supplier. 1.c) Until acceptance of the order PELFA GROUP S.R.L. will have the right to make changes and/or modifications to the same order, without the faculty for the Supplier to propose actions, exceptions or complaints. 

2) PRICES: The prices in the order that are understood as fixed and not subject to any variation, are those uniquely valid and effective, unless otherwise agreed in writing between the parties.

3) PAYMENT:
3.a) Payment will be made within the term provided in the order that will start from the delivery date of the products at the facilities of PELFA GROUP S.R.L in Buja (Udine), via Europa n.12/b or at other premises expressly agreed between the parties in writing or reported in the order with the transmission in telematic or paper form for all required documentation. 3.b) The payment methods are those indicated in the order.
3.c) PELFA GROUP S.R.L. will not recognise and will not accept any bank charges resulting from the issuance of effects or provisions of payment by the Supplier (bank receipts, promissory note etc.), unless otherwise agreed in the order.
3.d) PELFA GROUP S.R.L. will not made payments for supplies during the periods 01/31 August and 01/31 December; the deadline for such payments will be extended to the next month.
3.e) It is forbidden for the Supplier to give up all or in part, to third parties (eg. Banks, Factoring Corporations, etc.), the credits of every title coming from the contractual relationship with PELFA GROUP S.R.L., disciplined by the present general conditions. In compliance with the provisions of the previous paragraph, the parties expressly agree the prohibition of credits assignment of every title coming from the contractual relationship disciplined by the present general conditions, unless otherwise written agreement between the parties. 

4) SUPPLY AND DELIVERY:
4.a) the Supplier shall deliver the goods as follows:
- in compliance with applicable laws and regulations;
- in accordance with quality and dimensional standards set out in these general terms and conditions of the contract, technical specifications provided by PELFA GROUP S.R.L., and as described in the order;
- free from defects and rights of third parties;
- at the delivery date specified in the order and in the quantities specified in the order;
- the articles must be fully assembled in accordance with the technical specifications provided.
The Supplier will execute the order using exclusively technical and technological skills, maintaining full responsibility for the proper performance of the work.
4.b) Delivery is to be considered as the date of arrival of the goods at the place specified in the order, or, failing that, at the facilities of PELFA GROUP S.R.L. In Buja (Ud). The delivery terms indicated in the order have an essential nature.
4.c) In case of delay in delivery, PELFA GROUP S.R.L. will have the right to:
- cancel the order, reserving the right of action for compensation of damages incurred; 
- accept the products and charge a fine equal to 1% (one percent) of the value of the supply for each day of delay or part thereof, without prejudice to the right to apply for compensation for the greater damage suffered;
- buy from third parties goods or materials not received within the agreed terms, with the right to request compensation for damages and reimbursement of costs incurred; 4.d) Every Supplier’s delivery has to be accompanied by DDT (Transport Document), that must contain, at least, following information:
- job number of PELFA GROUP S.R.L., order number, date of the order, number of packages and their content. The goods will have to be delivered during the normal working hours: 8:00-12:00 13:00-17:00, unless other different and expressed agreement with PELFA GROUP S.R.L.
4.e) The ownership of the goods will be transferred to PELFA GROUP S.R.L. at the time of delivery and after the acceptance. 

5) INSPECTIONS AND CONTROLS BY THE SUPPLIER:
The Supplier is obliged to execute, under its responsibility and care:
- all checks on drawings, documents or technical prescriptions, even if provided by PELFA GROUP S.R.L., in order to check their conformity with the specifications of the order or the suitability for use for which they are intended;
- carry out, during the production process and upon finished work, all the trials and tests prescribed by the supply specifications or prescribed by the state law of the Supplier or that of the place of destination of the products, on raw materials and components, in order to guarantee and certify the good quality and conformity of the same products.

6) PACKING AND MATERIAL IDENTIFICATION:
6.a) The Supplier will carry out the packaging of products, which must be suitable to avoid damaging them during transport until delivery at the agreed place.
No charge for packing costs will be recognised by PELFA GROUP S.R.L., unless expressly agreed in writing or in the order.
6.b) The Supplier must ensure that the goods are contained or packaged in accordance with the usual practice for goods of the same kind or, in the absence of such a practice, in an appropriate manner to preserve and protect the goods until delivery is complete.
6.c) The Supplier is obliged to execute, under its responsibility and care, the identification of the goods by means of a label containing the following information:
- order number, contract number, design /code number;
- number of pieces. In presence of several job numbers in order, separate packages are required. 

7) SHIPPING AND TRANSPORT:
Transport shall be borne by the Supplier, unless otherwise agreed in writing. 

8) DOCUMENTATION AND CERTIFICATION:
8.a) It will be the burden of the Supplier to deliver any document or certificate that is expected as a obligation by the current regulatory instruments and/or requested by PELFA GROUP S.R.L. such as: performance declaration and CE marking, use and maintenance data sheet, technical data sheet, material certificates, test certificates etc.
8.b) The control documents that accompany the metal goods supply, must be in accordance with the standard EN 10204 - last revision, in accordance to what reported in the order or, in absence of other indications, in accordance to the minimum requirements imposed by the current regulatory instruments.
8.c) The above documentation is an integral and essential part of the supplied products and, therefore, failure or partial delivery of same will result in the violation of the terms of delivery, resulting in the application of that is governed by art. 4.
8.d) The Supplier must add in the supplied requested documentation, the traceability of the certificates reporting the identification codes of the ordered and provided items to PELFA GROUP S.R.L. For the complete the traceability, all the certificates must be stamped and signed by the Suppliers.
8.e) All the certificates drafted by the Supplier must be in Italian and in English, unless otherwise established. The terms of payment will start from the receipt of the last document requested by PELFA GROUP S.R.L. 

9) QUANTITY-QUALITY OF PRODUCTS - WARRANTY:
9.a) The Supplier must deliver only the quantity of products specified in the order; PELFA GROUP S.R.L. will accept the quantities ordered, reserving to reject, at the expense of the Supplier, the excess or non-conforming products by charging the storage and handling costs on account of 1% (one percent) of the value of the order.
9.b) The Supplier guarantees that the goods conform to all specifications agreed, including all materials, machining operations and whatnot, as well as the documentation and quantitative requirements, or that, in the absence thereof, are suitable for the purposes for which goods of the same technical features would normally be used and maintaining the functionalities and performance expected by PELFA GROUP S.R.L. according to the information, documentation and statements provided.
9.c) The warranty period is 24 (twenty-four) months from delivery, or other period of time indicated in the order or otherwise expressly agreed in writing between the parties. Failure to comply with the warranty obligations will give PELFA GROUP S.R.L. the right to take action for compensation for the damage suffered. 

10) INSPECTION RIGHTS:
Through its representatives PELFA GROUP S.R.L. will have the right to check and verify at the Supplier premises the quality of the materials used, the manufacturing or testing methods, as well as the smooth running or the progress of the supply.
The seller will allow free access to PELFA GROUP S.R.L, which shall take place with a notice of at least 5 (five) working days. 

11) TEST AND VERIFICATION:
In order to establish the correspondence of quantities, quality and characteristics provided in the order, the products will be subjected to checks and tests which will be performed by the staff designated by PELFA GROUP S.R.L., at the facilities of the Supplier , according to the methods agreed from time to time. The verification inspection of the finished product suitability will have to be convened with a minimum prior notice of 5 (five) working days.  

12) NON CONFORMITY:
12.a) In case of failure of verifications or test, PELFA GROUP S.R.L. will have the right to:
- request and obtain from the Supplier immediate repair or replacement of the non conforming pieces. All repair and adaptation expenses to the technical specification, suitable to pass quality control, including transport expenses, will be borne exclusively by the Supplier;
- at any time before the delivery or during working hours of the Supplier, PELFA GROUP S.R.L. will have the right at its own expense, to inspect the goods and production facilities of the Supplier, prior to reasonable notice, and/or request to perform random checks on the goods concerned, or component parts or materials thereof. If the results of these inspections or random checks should lead PELFA GROUP S.R.L. to believe that the goods are not conform, or that it is unlikely that they conform to the order or the specifications and/or drawings supplied or recommended by PELFA GROUP S.R.L. to the Supplier, PELFA GROUP S.R.L. must notify the Supplier and the latter shall immediately take all the necessary action to ensure compliance with the order. In addition, the Supplier must perform the inspections or additional checks at its own expense, at which PELFA GROUP S.R.L. shall have the right to attend. Despite any inspections or random checks by PELFA GROUP S.R.L., the Supplier shall however be responsible for the conformity of goods to the order and to the state of the art.
12.b) Receipt and payment of any non conforming products shall under no circumstances constitute acceptance of the same. 

13)PROPERTY AND CONFIDENTIALITY OBLIGATION:
13.a) Any drawings, papers, parts lists, rules and tables, specifications and requirements, like any other information or document as well as models and moulds, samples or specific equipment (know-how) made available to the Supplier for the fulfilment of the order, must be kept and stored with all diligence, remaining in any case the exclusive property of PELFA GROUP S.R.L.
13.b) All know-how should be considered confidential and reserved, that cannot be disclosed nor used by third parties even after the execution of the order and the Supplier shall use it only upon the express written permission of PELFA GROUP S.R.L. The Supplier will be responsible for the preservation of the documentation and of the material received for the execution of the order and must return them upon simple written request to PELFA GROUP S.R.L. together with the products. The know-how is an integral and essential part of the goods and, therefore, its non-or only partial return will involve the violation of art. 4) of these general conditions. 

14) PREVALENCE CLAUSE:
14.a) These general conditions of supply and/or purchase - that the Supplier declares to know and accept in full - unless waived by special conditions contained in the order - govern the relationship between PELFA GROUP S.R.L. and the Supplier and prevail over any other different clause, inserted in printing on the models used by the parties. 
14.b) Any and different conditions will not be accepted by PELFA GROUP S.R.L. if not expressly confirmed in writing. 

15) ORDER ASSIGNMENT AND SUBCONTRACTING:
The Supplier may not assign, in whole or in part, nor transfer, even by way of subcontracting, the execution of the order and the obligations deriving from it, without the written consent of PELFA GROUP S.R.L. 

16) WITHDRAWAL:
PELFA GROUP S.R.L. will have the right to withdraw from the contract at any time, in whole or in part, by means of written communication to the Supplier. Upon receipt of such communication, the Supplier must immediately cease the manufacture of items that are the purpose of the contract and arrange that an amount is immediately produced even by any of its subcontractors. 
In case of withdrawal PELFA GROUP S.R.L. will recognise to the Supplier an amount proportionate to production and documented up to the date of withdrawal and calculated according to the parameters agreed in the order. PELFA GROUP S.R.L. will in no case recognise any indemnity for loss of revenue. In case of withdrawal the Supplier will be obliged to immediately deliver to PELFA GROUP S.R.L. all materials already prepared and all documentation in its possession (drawing, technical specification, moulds etc.). 

17) SUSPENSION:
In the case of written request for partial or total suspension of the order, the Supplier must stop the work within the maximum time of 10 (ten) working days and operate, in this period, in order to avoid costs not strictly necessary to implement the due suspension of processing activities. The request to restart the work will be notified by PELFA GROUP S.R.L. in writing (also by e-mail or PEC).

18) APPLICABLE LAW AND COURT OF JURISDICTION:
18.a) Reports submitted and regulated by these general conditions are governed by Italian law.
18.b) Any dispute between the parties that may arise in relation to the relations governed by these conditions, as well as on the interpretation and enforcement of these general conditions, will be the exclusive and mandatory jurisdiction of the Court of Udine or of the Justice of the Peace of Gemona del Friuli (Ud). 

19) COMMUNICATIONS:
Any communication relating to the conditions contained in this contractual regulation and order linked to it must be made, on pain of nullity, by means of Public Certified Email (PEC) to the e-mail address : pelfagroup@pec.it 

Buja,
PELFA GROUP S.R.L
SUPPLIER


Pursuant to and by effect of articles 1341 and 1342 of the Civil Code the Supplier declares to know and approve specifically the following contractual clauses, listed for their specific approval, by signature, at the bottom of the same order:
1) Order;
3) Payment;
4) Supply and delivery;
9) Quantities - product quality - warranty;
12) Non compliance;
13) Property and confidentiality obligation;
14) Prevalence clause;
15) Transfer and subcontracting of the order;
16) Withdrawal;
17) Suspension;
18) Applicable law and court of jurisdiction.

Buja,
PELFA GROUP S.R.L
SUPPLIER 
QUALITÉ
Le marché toujours plus globalisé et compétitif demande aux entreprises d'atteindre un système qualité de très haut niveau. Pour cette raison, Pelfa Group apporte un maximum d'attention à la qualité de ses produits validée par une multitude de certifications. 
Une équipe de professionnels hautement qualifiés est entièrement au service de nos clients.

La vision du Département Qualité de Pelfa Group se résume ainsi:
  • Assurance Qualité: satisfaction des demandes client aussi bien pour les produits que pour la gestion documentaire.
  • Qualité du management: applications d’un Système certifié, organisé et éprouvé par le FPC - Factory Production Control – garantie du produit final.
  • Respect du Client: collaboration étroite avec le client dans toutes les phases de fabrication et de contrôle.
  • Respect des délais: rédaction de la documentation Qualité au fur et à mesure de la fabrication des produits.

Les normes utilisées sont EN ISO 9001:2015, EN 1090‐2(EXC4), EN ISO 3834-2, EN 15085-2, CL.1.
Nous avons plus de 150 procédures de soudage selon la EN 15614, des soudeurs qualifiés selon la EN ISO 9606-1, des contrôleurs CND qualifiés niveau 3 selon la EN ISO 0+9712 niveau 2 en accord avec SNTC et CSWIP.
certificazione-iis-cert.png
iiw.png
UNI EN ISO 9001
ISO 3834 Part 2
UNI EN 15085-2
fpc certificato.png